| |
|
Oil
and Gas Well Application
|
| Description:
|
RDX
explosive core
Shrinkage Resistant Braid (yellow)
Nylon jacket (black) |
|
 |
|
|
| Application:
|
A
higher velocity RDX PERFACORD® for use in high
shot density perforating systems where charge interference may
be a factor. This product is manufactured with a shrinkage resistant
braid and has a velocity of detonation 14% higher than the 80
RDX LS cord. A flexible nylon jacket provides easier installation
in the newer combination (wireline or TCP) high shot density
perforating systems that employ charge alignment deviations.
Recommended service temperatures are within the normal RDX operation
range (See graph). Users must satisfy themselves as to
a product's suitability for an exposed application. |
|
|
|
|
| SPECIFICATIONS
|
| Explosive |
|
80
gr/ft nominal (17.00 g/m) |
| Core
Load: |
|
75 gr/ft min. (15.96 g/m) |
|
Detonation |
|
7,850 m/s nominal (25,755 ft/s) |
| Velocity: |
|
7,500
m/s min. (24,600 ft/s) |
| Diameter:
|
|
0.210 inches nominal (5.33 mm)
+/- 0.008 inches
___ 0.218" (5.54 mm)
___ 0.202" (5.13 mm)
|
| Shrinkage:
|
|
1% Max. @ 325°F 24 Hrs |
| Jacket
Thickness: |
|
0.008" min. |
| Lap
Joint Sensitive: |
|
Yes |
|
|
|
|
| |
|
|
Temperature
resistance is based upon the manufacturer's
laboratory tests in air at ambient pressure only. No claim, representation,
or warranty of any kind is made, expressed or implied, as to the temperature
resistance of this product under actual conditions. Users
must satisfy themselves as to a product's suitability for a specific application.
Shrinkage is defined as core "pull-back" inside the outer jacket.
Velocity was tested unconfined, at ambient pressure, and after
"cool down".
Warning: Use of this product by persons who lack adequate training
experience and supervision may kill or injure. |
Application Recommendations
This product is not recommended for exposure to well bore fluids.
NEVER use PERFACORD® 80 RDX LS XHV in exposed well bore conditions.
ALWAYS cut PERFACORD® 80 RDX LS XHV detonating cord with a sharp knife.
NEVER attempt to cut PERFACORD® 80 RDX LS XHV detonating cord with a blow from a sharp or blunt object, such as an axe, pipe wrench, or rock.
NEVER saw PERFACORD® 80 RDX LS XHV detonating cord; it may explode and kill or injure.
NEVER cut detonating cord with devices that produce metal-to-metal contact, such as scissors, wire cutters, crimpers or similar instruments. |
| |
|
|
Storing
Detotec PERFACORD® must be shipped, stored, and handled in accordance with all federal, state,
provincial and local laws. Recommended shelf life under proper storage conditions is ten (10) years from
date of manufacture. Use older inventory first.
Detotec PERFACORD® must be stored in a cool, dry, well-ventilated, licensed storage magazine for
maximum shelf life. |
| |
|
|
| Shipping
Information |
| Package
Size: |
|
10
9/16" x 10 9/16" x 5 5/16" 4G fiberboard box |
| Package
wt: |
|
10.5
lbs (4.8 Kg) gross |
|
Contents: |
|
1-500
ft. spool & "Warnings/Instructions/Disclaimer" insert. 500 ft.
spools may contain as many as four (4) pieces, totaling 500
ft.(152.4m), with a minimum splice/piece length of 50 ft.
|
| UN Name: |
|
Cord,
Detonating |
| UN
Num.: |
|
0065 |
| UN
Class: |
|
1.1D
|
| Ref.
Num.: |
|
EX-2005100219 |
| Explosive
wt: |
|
5.7 lbs (2.6 Kg) |
| Alternate packaging: |
|
PERFAPACK® 1.4S air cargo shipping containers |
| Product Code: |
|
80R311A |
| Components, Explosive Train, N.O.S., |
1.4S |
UN0384 |
II |
EX 2003080150 |
|
|
|
PvTT 176/08 |
DISCLAIMER OF WARRANTIES AND
LIMITATIONS OF LIABILITIES
Because these products are used under varying conditions over which Detotec has no control the products described herein are sold by
Detotec without warranty, express or implied, including without limitation, any implied warranty of merchantability or fitness for a
particular purpose and/or any other warranty. Under no circumstances shall seller be liable for damages for loss of anticipated
profits, consequential damages, incidental damages or losses or damages to persons or property arising from the use of its products.
|
| |
|
|
| |
|
Detotec
North America Inc., PO Box 276, Sterling, CT 06377
860.564.1012 | fax 860.564.6895 | info@detotec.com |
|
|
|
|
|
